HUMIDCheck
Instruction Manual
Moisture meter for wood and building material
Used to measure the moisture level in sawn timber (also
cardboard, paper) and hardened materials (plaster, concrete
and mortar). It displays the moisture level in the material
straightaway.
Technical data
Measuring principle: Electrical resistance
Electrode length: 8 mm
Electrodes: Integrated, replaceable
Measuring range: Wood: 6 – 44 %
Material: 0.2 – 2.0 %
Display Wood: ±1 %
Accuracy: Material: ±0.05 %
Auto power OFF After approx. 15 minutes
Battery: 3 × Cr 2032, replaceable
Housing material: Impact-proof plastic housing
Ambient temperature: 0 - 40°C
Ambient Relative humidity: 0 – 85 %RH
Dimensions: 130×40×25 mm
Weight: 100g
Warranty: 1 year
Maintenance
l Always keep instrument dry.
l Prevent dirt from getting in between the measuring electrodes
l Changing the electrodes:
Unscrew the 5 screws at the back of the instruments.
Remove housing lid. Unscrew all 5 screws on the electronic
plate. Replace electrodes.
Close instrument again.
Function check
“O------T------O”
Connect electrodes with T contacts to the protective cap.
Reference display for wood: 27%±2%
Reference display for building material: 1.25%±0.1%
Function error: Send instrument for servicing.
Application
l Remove the cap from the top side and place on the bottom
side
The instrument switches on automatically.
l Press the measuring electrodes as far as possible into the
material.
l Always measure the moisture in the wood perpendicular to
the fibre structure.
l Repeated measuring yields representative measured data.
l Once the measurement is finished, reattach the cap on the
top side and the instrument switches itself off.
Display
The reading is shown in the form of bars:
a continuous line
= even values e.g. 6, 8, 14
dotted line
= uneven values e.g. 7,11
Overflow: reading • 44%/2.0%
Please note: Characteristics due to growth or type of wood and
deviating wood temperatures may make it necessary to correct
the displayed values. Measurements should be carried out
according to the drying and weighing/calcium carbide method in
the case of inspections or for reference purposes.
Automatic Power OFF
In order to conserve battery life, the meter will automatically turn
off after approximately 15 minutes. To press and restoration the
power switches the meter display is on.
Battery check
“ O…… B……O”
Connect electrodes with B contacts to the protective cap.
Reference display for wood: •44%
Reference display for building material: •2.05%
Display has to full.
Changing the battery
When the batteries become exhausted or drop below the
operating voltage, the battery warning “ “ symbol will
appear in the LCD display. The battery should be replaced.
Unscrew the 1 screws at the back of the instrument.
Remove the battery housing. Change battery. Observe
polarization! Reconnect instrument.
(34 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals